top of page

                 SLUDGE DEWATERING MACHINE
                  (0.5 to 90 ) Cubic  metre per hour

 

Sludge Dewatering Machine reduces the sludge volume and mass by removal of sludge water from interstices between sludge particles.

The sludge cake so produced, has Solid content of about 15-25%.

Main purpose of this machine is to minimize sludge handling and its disposal.It is the most cost effective and time saving method for sludge handling.

Sludge Dewatering is achieved by passing the polymer enriched slurry into the dewatering chamber, wherein, the slurry get compressed by a screw inside the compression cylinder.

At the outlet we get the cake which can be further reduced in volume with the help of a dryer.​

Why do we need Sludge Dewatering machine?

Features

Application

  • Suitable for sludge of 0.2%-10% solid consistency at Input and achievable Outlet consistency of 15-25 Dry solids.

  • Our machine can handle wide flow rate from 0.5 m3/Hr upto 150 m3/Hr and sludge concentration from 0.2 to 10% and can easily handle oily/sticky sludge.

  • Extremely low power consumption( 90-95% less than decanter centrifuge)

  • No need for regular operator

  • Non-clogging operation

  • Low footprint and noise free (less than 68dbA)

  • Easy to operate

  • Simple installation

  • All Range of Effluent Treatment Plant Sludge

  • Municipal Sewage Sludge

  • Textile ETP Sludge

  • Tannery Sludge

  • Food processing industry Sludge

  • Slaughter House Sludge

  • Water Treatment Plant Sludge

model dewatering_edited_edited_edited.jp

Want to Know more about this Product....

Call as at +91 9310481412 or Reach us on :-

globalsolutionmicro@gmail.com

bottom of page